Ancestral AlchemytraditionalAncestral Alchemy
モノアトミックゴールド(ORMUS Au)
Description
錬金術的湿式法を用いてゴールドをモノアトミック状態(m-state)に還元したもの:焼成 → 王水での溶解 → pH 10.78での沈殿 → 繰り返しの洗浄サイクル。m状態では、ゴール原子は金属結合を失い、ハドソン特許(1989年)で理論化されたクーパー対電子相互作用を持つ個々の高スピン原子として存在する。古代エジプトのファラオによって精神的覚醒と松果体の活性化のための「mfkzt」(白いパン)として使用されていた。現代の実践者は瞑想の深さの向上、明晰夢、および神経伝導性の向上を報告している。エジプト、ベーダ、道教の錬金術伝統全体で祖先から証明されている。
How to Prepare: Monoatomic Gold (ORMUS Wet Method)
advancedEquipment Required
Borosilicate glass beaker (2L)Fume hood or outdoor ventilationpH meter (0.01 resolution)Magnetic stirrer with PTFE stir barAcid-resistant gloves & face shieldNaOH (lye) — lab gradeAqua regia (3:1 HCl:HNO₃)Triple-distilled waterCeramic crucible for calcinationFurnace capable of 1100°C
PHASE 1Calcination of Gold
Starting material: 99.99% pure gold (wire, shot, or foil) — never use jewellery alloys
Crucible: Place gold in ceramic crucible, heat to 1064°C (melting point) then sustain at 1100°C for 2 hours
Purpose: Breaks metallic lattice bonds, creates oxidised gold surface receptive to acid dissolution
Cool-down: Allow to cool naturally in crucible — thermal shock can shatter ceramic
Molten gold emits intense infrared radiation. Use foundry-grade face shield and heat-resistant gloves. Never quench in water.
PHASE 2Aqua Regia Dissolution 4-6 hours
Acid ratio: 3 parts HCl (37%) : 1 part HNO₃ (70%) — prepare fresh, never store mixed
Volume: ~40 mL aqua regia per gram of gold
Process: Add calcined gold slowly to acid in borosilicate beaker. Vigorous reaction produces chloroauric acid (HAuCl₄) — deep orange/red solution
Duration: 1-4 hours at 60-80°C with gentle stirring until gold fully dissolves
Evaporation: Gently evaporate to remove excess HNO₃ — add small amounts of HCl and re-evaporate 3x to drive off all nitric acid
MUST be performed in fume hood. Aqua regia releases toxic chlorine and nitrosyl chloride gases. Never add water to acid — always acid to water.
PHASE 3Alkaline Precipitation (The Key Step)
Dilution: Dissolve dried chloroauric acid in 1L triple-distilled water
Lye solution: Prepare NaOH solution (10% w/v) in distilled water
Critical pH: Add NaOH DROP BY DROP with constant stirring. Target pH: 10.78 ± 0.05 — this is the precipitation point for m-state gold
What happens: At pH 10.78, gold transitions from ionic Au³⁺ to m-state. Solution turns milky white → the 'white powder of gold' (mfkzt)
Overshoot warning: If pH exceeds 12.0, you precipitate gold hydroxide instead of m-state — batch is ruined for ORMUS purposes
NaOH is severely caustic. Wear nitrile gloves and eye protection. Keep vinegar nearby to neutralise skin splashes.
PHASE 4Wash Cycles & Purification 7-14 days (patience is essential)
Settling: Allow precipitate to settle 24-48 hours in dark, covered container
Decant: Carefully siphon off clear supernatant (contains residual salts)
Wash: Add fresh distilled water, stir gently, let settle again. Repeat 7-10 times until wash water pH is neutral (7.0)
Purpose: Removes NaCl (salt byproduct), residual NaOH, and any remaining chloride ions
Final product: White, fluffy precipitate suspended in pure water — this is your ORMUS gold concentrate
Safety Warnings
- • Full PPE required: acid-resistant gloves, face shield, lab coat, fume hood
- • Never mix aqua regia in advance — prepare fresh each time
- • pH 10.78 is critical — invest in a quality digital pH meter, not litmus strips
- • Keep all ORMUS preparations away from strong electromagnetic fields (microwaves, speakers with magnets)
- • This process involves concentrated acids and caustic bases — formal chemistry training strongly recommended
Expected Yield
~10 mL concentrated ORMUS suspension per gram of gold
Storage
Dark glass bottle (amber or cobalt blue), room temperature, away from EM fields and direct sunlight. Shelf life: indefinite if stored properly.
Evidence
traditional
Connections
1 entities
Rate this element
How effective has モノアトミックゴールド(ORMUS Au) been for you?